The short answer is yes. You can put longboard wheels on a regular skateboard. Although it has some limitations, you should be aware of them before proceeding further.
This article addresses the question, can you put longboard wheels on a skateboard? Including the difference between skateboard wheels and longboard wheels.
The longboard wheels are soft, though they are usually used for cruising and rough roads. Compared to skateboard wheels, longboard wheels are quite large, but they can be used for cruising and rough road riding on a skateboard.
Note: Longboard wheels won’t work if you like performing tricks or riding on smooth surfaces, such as skateparks and ramps. On a skateboard, it’s best for cruising and rough terrain.
What is the difference between skateboard wheels and longboard wheels
Longboard wheels are quite bigger, wider, and softer than skateboard wheels. Hence, the longboard provides a faster and smoother ride, even on rough surfaces.
Furthermore, the skateboard has specific soft wheels for rough terrain and cruising. While the longboard wheels are bigger and softer, it still performs well on roads that have cracks, bumps, and more such things.
Considering longboard vs skateboard wheels, it would seem that they do have their advantages and disadvantages. Depending on your riding style, you will have to select one.
If you ride on rough roads occasionally, soft skateboard wheels are good, whereas longboard wheels are best if you ride on rough roads regularly.
If you like to perform various technical tricks on a skateboard, the longboard wheels won’t work for you. To perform tricks, you need specially designed small skateboard wheels.

Can You Put Longboard Wheels On A Skateboard
The longboard wheels diameter is mainly between 63-75mm, while the regular skateboard wheels diameter is 48-60mm.
The hardness of wheels also plays a significant role. The longboard is used for downhill, cruising, and commuting purposes though it has soft wheels, while the skateboard has both soft and hard wheels options. Hence You can put longboard wheels on a skateboard.
You can check our recommended article if you want the best skateboard wheels instead of longboard wheels for your skateboard.
Things To Avoid
The biggest problem you’ll have with longboard wheels on a skateboard is wheel bite. Wheel bite occurs when the wheels are large and touch the skateboard deck while turning. As a result of the sudden stop of wheels rolling, the rider loses balance and falls off the board, resulting in serious injury.
Hence, to avoid this, you should use smaller longboard wheels that are not bigger than 70mm for the skateboard. Adding a riser pad will also increase space between the wheels and the deck, which helps reduce the likelihood of wheel bite.
How to put longboard wheels on a skateboard
Your first step is to get a skate tool or T tool and remove the old wheels from your skateboard. Next, prepare your longboard wheels, either by removing them from the board or buying new ones.
You must add riser pads before putting longboard wheels on a skateboard to prevent wheel bite.
Adding riser pads requires two 1/2-inch riser pads and eight 1 1/2-inch bolts. Ensure you have a T tool to fit the riser pads if you don’t already have one.
Hence, to put the riser pads, you have to get out the trucks from the skateboard by losing the bolts.
You can now place the riser pads below the skateboard deck. Be sure to align the holes of the riser and the holes of the deck for proper fitting.
Fit the riser by screwing in the bolts from the above side of the deck and making sure the ends of the bolts are pointed downward.
Last but not least, mount the longboard wheels on the trucks and tighten the trucks to the skateboard deck. Ensure you have riser pads between the trucks and the deck this time.
If you like cruising and rough road riding, you can read our guide and review of the best longboard wheels for cruising on rough roads.
Drawbacks Of Using Risers
So far, you have seen how a riser allows you to use longboard wheels on a skateboard, but there are some disadvantages to using risers.
Risers increase the distance between the skateboard deck and the ground. This results in less balance and control while riding because the center of gravity is higher.
Think twice before adding longboard wheels or risers to your skateboard, as skating is all about balance and comfort. Skating won’t be fun if you don’t have these two things.
As long as you’re an experienced rider, you’re able to use this board to commute or cruise around town. Also, note that you will not be able to perform tricks, whether you’re a professional or just a beginner.
Can you put cruiser wheels on a skateboard?
You can put cruiser wheels on a skateboard, but it is not recommended. Cruiser wheels are bigger and wider than standard skateboard wheels, which can make your skateboard less stable and more difficult to control. If you decide to put cruiser wheels on your skateboard, adjust your trucks and bearings accordingly.
Are skateboard and longboard wheels the same?
No, skateboard wheels are smaller and harder than longboard wheels. Longboard wheels are designed for cruising, stability, and speed, while skateboard wheels are designed for tricks and street skating.
Can you ollie with longboard wheels?
You can ollie with longboard wheels, but they will not perform as well as skateboard wheels. Longboard wheels are bigger and softer, which makes them better for cruising and carving, but they are not as good for doing tricks.
Is it harder to do tricks with longboard wheels?
Yes, it is harder to do tricks with longboard wheels because they are bigger and softer. Skateboard wheels are smaller and harder, which makes them better for tricks and street skating.
Conclusion
Lastly, I would recommend putting longboard wheels on your skateboard only if you have no other option for new skateboard wheels. Longboard wheels are OK for regular skateboards, but it doesn’t have the same thrill as riding them on a longboard.
Thank you for reading this article. I hope you find it informative and helpful. Feel free to comment below with any skateboarding questions you may have.

I am James Buckridge, the founder of skateboardidea.com. Skateboarding is my passion, and I have years of teaching experience in this field. Our vision and mission is to provide you with accurate information on everything related to skateboarding. Catch me on Twitter & Pinterest.