The kickflip is an advanced trick inspired by the ollie. Whether you are skateboarding or fingerboarding, the kickflip is one of the most attractive tricks. Hence, if you are looking for how to kickflip on a fingerboard, you have come to the right place.
In order to learn kickflips, you must first learn how to ollie on a fingerboard because if you can’t ollie, you can’t kickflip. According to above, kickflip derives from ollie, so the basic first moves of kickflip are ollie moves, but later we flip, so it’s called kickflip.
We’re going to learn how to kickflip a tech deck once you know ollie.
How To Kickflip On A Fingerboard
The first thing you need to learn kickflipping on a fingerboard is a reliable fingerboard. If you want to buy a high quality fingerboard, you need to consider several factors such as the brand, each part’s quality, and many others. So to avoid this headache research work, you can check out our review of the best fingerboards.

Step 1: Finger placement
Finger placement is the very first thing to learn for performing a kickflip or any other fingerboard trick. You will never be able to perform any fingerboard trick if you do not know where to place your fingers.
You should place your middle finger on the tail of the tech and your index finger (pointer finger) behind the screws that connect the trucks to the deck for a kickflip.
Initially, this finger position may be uncomfortable, but you’ll get used to it if you take the fingers off and put them back on. To ensure you are comfortable in the position, practice it before moving on.
Step 2: Practice Rolling The Fingerboard
After you’ve learned to place your finger on the deck, you can start rolling in a forward direction.
Although rolling should be done at high speed to lift the fingerboard easily, it is advisable to start slowly. Don’t try to get the board in the air yet; just learn how to roll the board in the direction you want to perform the trick.
As much as possible, practice rolling the board fastly after practising slowly in the forwarding direction without losing finger placement.
Step 3: Popping The Board
Until now, you have not been able to flip the board. Now you have to practice popping the board.
Start rolling the board fast and apply pressure to the finger on the tail of the board to touch the deck on the surface. In this way, you will be able to see the top part of the deck in the air but connected to the ground since you have not yet mastered flying it.
This way, you can practice popping the board until you master the basics.
Step 4: Practice Like an ollie
You’ll find all the steps listed up to now easy if you already know how to ollie, but now the real challenge begins.
Up to this point, practice having the front part of the board in the air by rolling the board quickly and pressing the tail on the ground. After that try to get a complete fingerboard in the air and land balanced.
Although this is an ollie, not a kickflip, it is the basics of a kickflip, which makes it necessary to master. Now let’s move on to the real challenge.
Step 5: Change The Position of Index Finger Towards Nose
In order to perform an ollie, we don’t change our finger placement until it is done, but in order to achieve a kickflip, you have to change your index finger position.
It is very easy, so don’t hesitate. Place your index finger toward the nose of the fingerboard when it is in the air.
You might lose your finger from the board at first and lose your balance on the fingerboard. Thus, practice it as much as you can so that you will be able to perform kickflips easily in the future.
Step 6: Again, Change Position Of Index Finger And Apply pressure
Your index finger needs to be positioned slightly closer to the edge of the deck this time, and a little pressure should be applied. You can easily flip the board when you apply pressure to the edge.
Learning this is quite challenging but not impossible. Furthermore, this is a fundamental difference between kickflipping and ollieing. In spite of the fact that you perform kickflips perfectly in a few attempts, practice before showing off to your friends because you may lose your finger balance at any time without prior practice.
In short, practice is the key to mastering this step.
Step 7: Land The Fingerboard Balanced
As you flip the board in the air, try to balance it and place your fingers as you place before performing a trick. In addition, after landing, do not stop at a place that may throw the fingerboard off balance. Rather keep rolling forward after landing so that the fingerboard gets under control. Thus, you can easily land the trick without losing balance on the fingerboard.
Tips To Learn Kickflip Faster On Tech Deck
- Beginners should not try to perform tricks faster. Not only will you waste time, but you won’t be able to perform tricks. Thus, practice the trick slowly until you are able to complete it.
- The trick can be performed at high speed once you have mastered it slowly. Practising slowly would prevent your fingers from suddenly performing it quickly, so make sure you do this as well. It won’t take you long to achieve good speed and control on your fingers to perform tricks faster.
- Make sure your fingers are placed correctly, and you are comfortable on that tech deck if you’re still not able to perform the trick. There are times when the deck is too small, which causes your fingers to feel uncomfortable. You can replace the fingerboard with a bigger one if you find the existing one uncomfortable and small.
Conclusion
The main difference between the kickflip and the ollie is that the fingerboard needs to be flipped in the air. Therefore, if you learn to ollie and 360 kickflips, you are already familiar with two of the most popular fingerboard tricks.
We have enclosed a complete step-by-step guide and answers to your question about how to kickflip on a fingerboard in this article. You can learn more tricks like this on both skateboards and fingerboards by checking out our other articles.

I am James Buckridge, the founder of skateboardidea.com. Skateboarding is my passion, and I have years of teaching experience in this field. Our vision and mission is to provide you with accurate information on everything related to skateboarding. Catch me on Twitter & Pinterest.