How to take trucks off a skateboard [Solved]

The process of replacing skateboard trucks is pretty straightforward, but removing the existing ones without damaging a board is difficult for beginners. Hence, this article will guide you on how to take trucks off a skateboard, as well as the tools you require.

By following these steps, you will be able to remove your trucks easily.

Until then, if you have not selected your new skate trucks, check out some of the best skateboard trucks here.

How To Take Trucks Off A Skateboard

Be calm and relaxed before you begin removing the trucks. The removal is not so difficult as you may believe. Stress will definitely lead to mistakes, so be calm before you take any action.

Be Prepared

If you want to get your work done quickly and easily, you need to have all the materials and tools ready.

• You want to remove the trucks from the skateboard
• Screwdriver
• A skatetool or a T-tool
• Desk or smooth surfaces to perform the task

Note: You can also use a plier or wrench if you don’t have a skate tool.

Additionally, make sure that your board screws are compatible with your screwdriver. It’s better to get a new one if the existing one doesn’t fit properly, and while choosing a new one, make sure it has rubber grips to make your work easier.

Further, as the fourth point says, a desk or smooth surface is very important. Many people overlook that if the desk or surface is not smoothed or thoroughly cleaned before it’s laid on, it will get scratches on the skateboard deck, which looks terrible. So when removing the trucks, you need to make sure that the other components of the skateboard are not damaged, as otherwise, you will need to replace them after some time.

Position The Skateboard

Position the skateboard horizontally on a working surface according to your preferred hand so you can do your work without needing any additional effort.

As soon as you start removing the trucks without proper positioning, you won’t be able to do it properly, so it’s better to adjust your board and yourself first.

Remove The Nuts

When you have adjusted yourself and the board, you need to remove all the nuts that hold the trucks to the deck. 

For this purpose, you can use pliers or the smallest socket of a skate tool. Next, pick any nuts of trucks and put the skate tool, then put the screwdriver inside it from the upper side.

Until now, make sure all the steps are followed correctly, then turn the screwdriver counter-clockwise while holding both of your hands on one side. As you do this slowly, the nuts will fall out of the trucks, and you will have to do the same with all the other nuts. It might take some time, but this is the safest and easiest way to remove the nuts.

Note: When removing the nuts, store them in a safe container because you will need them when adding new trucks.

Take Trucks Off A Skateboard

When you’re done removing all the nuts, take the trucks off your skateboard. Be sure to remove the trucks slowly so that you don’t damage the truck or the board. 

Once you’ve removed the trucks from the deck completely, you can either put new trucks on it or hang them on the wall. Many people do so to recall their memories of that skateboard.

See Also: How to tighten skateboard trucks

Conclusion

In order to remove the trucks from a skateboard, all you need to do is this. The experience we gained led us to make this the easiest guide for those who are looking for how to take off skateboard trucks.

Make sure you put extra focus when performing this since a small mistake can damage your skateboard. Following the steps provided in this article is the best way to avoid any damage.